The EA 600 single beam
echosounder operates up to four high power transceivers simultaneously. For
improved performance, they are installed close to the transducers and linked to
the combined display and processort transducers is available to suit all your
operational needs from extreme shallow water to a depth of 11.000 meters. with a
single data cable. Available frequencies span from 12 to 710 kHz. A variety of
highly efficien |
| EA 600 Single beam echosounder data storage |
The EA 600 has a USB port in
front where a read/write CD-ROM or DVD can be connected. System software is
supplied on a CD ready for installation, as are subsequent software releases.
Data storage may also be performed via this interface. |
| Multipulse function |
In deeper waters, the EA 600
single beam echosounder supports a multipulse function, which allows a higher
pinger rate - and thus better accuracy than what is normally possible. |
| Passive mode - pinger option |
|
The EA 600 provides an advanced and synchronized
passive mode for depth measurements using a pinger. This pinger is normally
attached to a device, with the purpose of tracking and displaying its current
depth. |
| Remote control software for EA 600 - EA RDS |
|
The EA RDS Remote Display System is a remote
control viewer for use with the EA 600 single beam hydrographic echosounder. The
software is designed to display a real time echogram from host computer and the
data can be sent to one or more computers by network. |
| Kongsberg EA 600 Specification |
General
Purpose Transceiver (GPT)
Operating frequencies: 1 or 2
Single beam frequencies: 12, 18, 33, 38, 50, 70, 120, 200, 210 or 710 kHz
Power output:
• 12 to 50 kHz Variable up to 2 kW
• 70, 120, 200 and 210 kHz: Variable up to 1 kW
• 710 kHz: 100 W
Supply voltage:
95 to 265 Vac, or 12 Vdc, 50 to 100 W
|
